LEUCO produces innovative TC and DP tipped circular saw blades, hoggers, boring bits, shank type cutters as well as clamping systems and turnover knives for processing wood, wooden and composite panels, plastics and NF-materials, tool management & service.
The „LEUCO g5-System“ includes all the saw blades with the unique g5 tooth group cutting geometry. It stands for excellent cutting quality, thin kerf, extremely low vibration and for long edge lives also in abrasive materials. Perfect for use in wood based panels (miter cuts in veneered or foiled door frames; sizing cuts in laminated panel boards and also in honeycomb panels), in solid wood (chip-free cut across the grain) and in plastics (chop cuts in thin-walled plastic profiles).
Diamond tipped No Noise Panel Sizing Saw Blades
New diamond-tipped conical Scoring Saw Blades "NoNoise" for panel sizing saw blades: the visibly minimized gullets lead to a noise reduction of 6 db(A) when idling and is available up to diameter 450 mm with tooth geometries TR-F-FA, G6 und G3.
Whether universal application in single sheets and stacks, raw, veneered or plastic-laminated wood-based panels - the right saw blade for each application for the most common horizontal panel sizing saws.
Saw blade program UniCut plus
LEUCO improved the panel sizing saw blade program “UniCut plus” with regard to running meter performance and cutting quality. To improve considerably the running meter performance, LEUCO uses the new cutting material “LEUCO Board 03 plus” and a new tooth geometry for increase of edge lives by approx. 30%.
The multi-functional saw blade for pressure beam machines is available from stock in diameters from 350-450 mm. Excellent cutting results can be obtained in single sheets and stacks up to 80 mm
Excellent cutting quality on the classic pressure beam machines also requires a scoring saw blade which is optimally adapted to the main saw blade. The two saw blades should be considered as a "pair". This is why LEUCO enhanced the diamond-tipped scoring saw blades as well in addition to the di...| » Further reading
Peel cuts with the patented p-System is the revolutionary woodworking process in stationary or through-feed processing. The best available cutting quality and long tool life for materials and processes that were unthinkable up until now, can be achieved. Until now, tools for jointing, dividing, c...| » Further reading
The carbide tipped saw blade "g5-System" is applied for clipping and miter cuts in plastic profiles. The diamond-tipped version is applied for very abrasive materials such as fiber reinforced profiles. Extremely low-noise cuts and low wear in aluminum profiles are obtained by the g7 saw blades. ...| » Further reading
LEUCO Ledermann GmbH & Co. KG
72160 Horb am Neckar
Phone: +49 745 1930
Fax: +49 745 193270
IP Vladimir Simonov
Volgogradsky pr. 93, k. 2
Phone: +7 499 1736843
Fax: +7 499 1736843
Get in contact with German companies in 3 easy steps! With one single question you can reach all relevant German Pavilion exhibitors of your selected industrial branch.
Click here if you notice an image that violates copyright or privacy rights.